/Flowserve
  • Flowserve

    Atomac

    Atomac Lined Ball Valve

    A two piece full port standard lined ball valve which offers high safety factors, high stability, rigidity and eliminates a potential leak path. The full port design minmizes pressure losses and increases flow capacities thus reducing energy and pumping costs.

    Documentations

  • Flowserve

    Atomac

    Atomac Lined Ball Valve Short Pattern Full Port

    The AKH2A is an ANSI B 16.10 short pattern full port lined ball valve. This valve has the same characteristics as the AKH2 however, at reduced space and weight.

    Documentations

  • Flowserve

    Atomac

    Atomac Lined Ball Valve Short Pattern Reduced Port

    The AKH3 is an ANSI B16.10 short pattern, 150 ibs., reduced port, lined ball valve with a minimum cavity space. The floating ball design ensures bubble-tight shut-off across the pressure range of 1 mbar to 19 bar. Long term protection against external leakage to atmosphere is provided by PTFE chevron packing rings in a deep stuffing box, the substantial body flanges and the moulded liner seal.

    Documentations

  • Flowserve

    Atomac

    Atomac Ceramic Lined Ball Valve Full Port

    Due to advanced ceramic technology, the AKH5 achieves an unequalled performance that offers the ideal solution for many difficult applications in which erosion, wear, abrasion, impact, corrosion and high temperature cause conventional materials to fail.

    Documentations

  • Flowserve

    Durco

    Lined Butterfly Valve Wafer

    • Reduced downtime through the standard lined body and disc that defends against the most corrosive chemicals • Lower maintenance costs from the triple-seal design and live-loaded shaft seal that never needs adjustment • Increased application flexibility provided by a large selection of metal discs for use when greater protection is required • Increased abrasion resistance in applications up to 93°C (200°F) with optional UHMWPE disc and body

    Documentations

  • Flowserve

    Atomac

    Atomac Lined Swing Check Valve

    The fully PFA lined atomac swing check valves are ideal for use in highly corrosive applications and can replace swing check valves made from exotic alloys due to the universal chemical resistance of the fluorpolymer lining. These valves can be used in horizontal and vertical installations due to the special design of the hinge pin, which enables the disc to achieve a seal without support of any system pressure.

    Documentations

  • Flowserve

    Atomac

    Atomac Lined 45° Ball Check Valve

    This ball check valve can be installed either vertically or horizontally and offers an unobstructed flow due to the fact that the ball is pushed in to the 45°cavity.

    Documentations

  • Flowserve

    Atomac

    Atomac Lined Ball Check Valve

    This two piece body designed check valve provides high stability, rigidity and eliminates potential leak path and can be installed either vertically and dependent upon application horizontally as well. Ball material consists of solid PTFE. Liner materials such as FEP, PFA and conductive PFA have outstanding corrosion resistant properties.

    Documentations

  • Flowserve

    Valtek

    Linear Globe/Anger Control Valves - Mark One

    • Small, compact, lightweight body and actuator package • Stiff and high-thrust cylinder actuator offers position accuracy, repeatability, and assured response • Broad solutions envelope with significant flexibility

    Documentations

  • Flowserve

    Valtek

    Linear Globe/Anger Control Valves - Valtek GS

    • Maximum Cv capacity minimizes valve size and cost • Low cost, compact, lightweight • High performance and reliability • Wide range of general service applications • Ease of maintenance

    Documentations

  • Flowserve

    Logix

    Features & Benefits

    • Local Interfaces with status LEDS, DIP Switches, Calibration Buttons • Auto Tuning with dynamic gain selection • Utilizes 4-20 mA with HART 6 and 7 communication • Simple calibration via local interface • Increased air handling capabilities • For use with Single Acting • Diagnostics Capability • Explosing Proof Protection • Optional LCD Display

    Documentations

  • Flowserve

    Logix

    Features & Benefits

    • Local Interfaces with status LEDS, DIP Switches, Calibration Buttons • Auto Tuning with dynamic gain selection • Utilizes 4-20 mA with HART 6 and 7 communication • Simple calibration via local interface • Increased air handling capabilities • For use with Single Acting and Double Acting • Diagnostics Capability • Intrinsically Safe Protection • Optional -LCD Display -Limit Switches -Remote Mount Card -Feedback Card 4-20 mA Output

    Documentations